METASYS EXCOM ZA1 central suction with amalgam separator for 1 treatment unit.

An innovative design, powerful suction and reliable operation: these are characteristics that describe the central suction and separation solutions from METASYS. Suction power from dry suction systems, integrated air-/water separation and dynamic amalgam separation are the cornerstones of the METASYS central suction system, which also convinces with extreme user-friendliness and an its efficient technology .

The advantages of the METASYS central wet suction system are convincing:

Cost reduction effect: the excellent integration of the dry suction system, air-/water and amalgam separation allows cost savings at the installation, operation and maintenance.

Reliable and powerful: the METASYS wet suction system is convincing through its high suction performance at the cannulae as well as its reliability even under heavy duty.

Maximum operational safety: thanks to the optimal air-/water separation highest functionality and an undisturbed use can be guaranteed.

User- and maintenance-friendliness: due to the specially compact, modular construction of the METASYS central solutions.

Environmentally friendly : thanks to the dry suction system no more valuable drinking water is wasted.

• Technical data:
• Connection voltage 230 V AC
• Frequency 50 / 60 Hz
• Max. current consumption 3.7 - 3.5 A
• Electricity consumption 0,37/0,44 KW
• Vacuum range regulated 180 mbar
• Max. ambient temperature 40° C
• Max. water delivery rate 4.5 l/min (1.5 l/min suction side + 3 l/min spittoon bowl
• Separation rate, COMPACT Dynamic 96.4%
• Amalgam container exchange interval 6 - 8 month
• Weight 40 kg

METASYS BORA Dental Compressor for 1 treatment unit.

METASYS compressors are manufactured and licensed according to the EU guidelines and the legal regulations which apply in the individual countries.

Its innovative stroke and engine technologies guarantee a silent and continuous pressure build-up. 3 step drying and filtration processes with a condensation separator, drying column and sterile filter provide absolutely dry and low bio burden compressed air.

The inside of the tank is coated with components which guarantee the best possible maintenance of the air reserves.

METASYS compressors operate absolutely oil-free and are standardly fitted with an hour meter. This device helps to define servicing intervals and thus even more reliability.

• Technical data:
• Tank capacity in l 30
• Output of electrical motor in kW 1.1
• Rate of delivery in l/min 66
• Other equipment which can be operated simultaneously 1
• Dimensions in cm (WxDxH) 680x450x650 mm
• Power supply V AC 230
• Frequency in Hz 50
• Pressure range in bar 6-8

Description

IntraOs DG is an innovative dental X-ray equipment which meets the most stringent imaging requirements in the dental fi eld, both when using high resolution digital receptors or finest grain films.

The best results can be achieved when in combination with digital sensors, the full imaging potential of which, powered by image processing and manipulation, can be exploited without compromises.

The joint use of extra fi ne focus (XFF) generators and high resolution digital sensors is actually setting a new imaging standard with highly defi ned images and with great diagnostic power.

The very small focal spot of the X-ray insert, the beam limiting device with effective near focus collimation and the penetration power of the70 kV radiation beam constitute the best combination of elements to get sharp images with good radiographic contrast and optimum detail perception.

TECHNICAL DATA

• Tube Head:
• Focal Spot: 0.4 IEC 336/1993
• Mains Voltage: 120/230 VAC, 50/60 Hz
• High Voltage Potential: 70 kVp
• Anodic Current: 3.5 mA
• Inherent Filtration: 2.5 mm Al
• Focus Skin Distance: 21 cm
• Output Radiation Field: Round 6 cm, Rectangular 3.5x4.6 cm
• Weight: 6.5 kg
• Mechanical Support system
• The wall mounted support system includes:
• • Wall support (12 cm width, 24 cm height, 9 cm depth)
• • 30, 60, and 80 cm extension arms
• • Folding arm; useful reach of:
• 138 cm with 30 cm extension arm
• 168 cm with 60 cm extension arm
• 188 cm with 80 cm extension arm
• The mobile support is composed of:
• • Mobile stand (74 cm width, 112 cm height, 62 cm depth)
• • Folding Arm (73 cm height) Timer TipSet in mAs
• Mains: 115/230 VAC, 50/60 Hz
• Microprocessor controlled functionality
• Sensitivity setting for digital receptor and fi lm
• Automatic setting of technique factors by object selection or manual mode
• Technique factors in mAs from 0.21 to 11.2 (18 steps R10 scale)
• Zero-crossing power switching
• Dose consistency (accuracy and reproducibility)
• Inhibition of effects of mains fl uctuations selectable on request
• Back-up timer
• Hand-switch with 3 m coiled cord
• Timer and/or hand-switch can be remotely mounted
• Dimensions: 15 cm width, 24 cm height, 9 cm depth