HIGH SPEED CURING & WHITENING DEVICE

The Remecure is a high speed dental curing light, for use with curing composite fillings and

performing in-office whitening procedures. The product utilizes plasma-arc illumination technology

that offers numerous advantages over other light sources and is able to perform all

dental treatments that require light curing.

FEATURES

HIGH SPEED CURING

• The ultimate in curing effectiveness.

• Cycle times can be set to any length from 3 to 8 seconds in one second steps.

• Cures Camphor Quinone and PPD Composites in just seconds.

• Ergonomically designed one-touch activation ring makes operation easy and fast.

• Built-in radiometer shows go/no-go output power indication.

• A must-have for orthodontic and cosmetic treatments!

• Curing Power Output: 1.850 mW/cm2

IN-OFFICE WHITENING

• Fully automated whitening cycles

• Simultaneous exposure of upper and lower arch

• Increased comfort for patient and dentist

• Whitening Power Output: 2.900 mW/cm2

INCLUDES

• Dual arch whitening tip & stand

• 8 mm curves curing tip

• Safety glasses

• Light funnels

• Set of cheek retractors

• Instructions for use

• Point Of Sales material (poster, display and consumer leaflets)

The Millennium type B2 sterilizer is technologically advanced equipment which is also extremely easy to use. Thanks to theirs high number of configuration options and to the corresponding patented devices, they can satisfy any sterilization requirement and ensure the highest performance in every situation.

STERILIZATION CHAMBER

The single-piece for 21-litre model, formed stainless steel sterilization chamber ensures higher durability, quality and finishing. The 21-litre capacity for Millennium B+ allows the use of a special tray holder for five trays closed cassettes.

LOCKING SYSTEM

The special locking system has been designed in conformity with the strictest standards. It is characterised by a double door-locking robotized mechanism with a triple-protection system which ensures complete safety and usability. A slight pressure will close the door with no further effort.

PRINTER

Millennium sterilizers are equipped with an integrated thermal printer (standard for Millennium B+ and Millennium B2, optional for Millennium B), which allows the complete recording of all the cycle data. Printouts can be customized according to different requirements. All reports can be printed in multiple copies, which allows the identification of each individual sterilized tray and ensure the user’s easy filing. In addition to that, the serial connection allows the storage of data in the PC by means of a suitable software.

DISPLAY

A wide multilingual liquid crystal display allows the clear visualisation of all the necessary information in real time. The four lines of characters and the included symbols guide the users throughout their navigation in the various cycle phases and provide indications of the autoclave’s functioning status. The innovative multi-level setup program allows the customization of the various functions and meets the most demanding user’s requirements.

STERILIZATION PROGRAMS

The menu offers a wide range of programs, specifically developed for a suitable treatment of the various materials. Different combinations of the vacuum pulses, temperature and process time and the duration of drying, allow the efficient sterilization of each type of load.

PROCESS EVALUATION SYSTEM

The advanced sterilization process self-evaluation system (“Process Evaluation System” as defined by EN 13060:2004), allows an accurate cross-referenced control of the basic parameters of temperature, pressure and time. It also signals any failure throughout the whole sterilization process and it provides the user with the most fundamental guarantee: the total safety.

MILLENNIUM B2 FEATURES

• Type B2 conforming to prEN 13060: 2002 Capacity 21 litres
• Microprocessor controlled electronics
• Instant patented steam generation system
• Fractionated vacuum system to ensure the complete removal of air
• Customized vacuum drying
• Advanced multilingual software
• Stainless-steel sterilization chamber
• Robot-controlled locking system
• Integrated printer
• Integrated water filling and draining tanks
• Wide range of sterilization programs
• 5 standard trays provided

This is a 70 KV digital power Inter-oral wall mounted X-ray Unit

Optimizes space, providing, safety, precision and practicality.

Automatic Time Compensation Device: Automatically corrects the exposure time, according to the tension oscillations in the power line. The result is an excellent radiographic quality, reducing the occurrence of errors and increasing the durability of the device.

• Safety Device
• The Dabi X-Ray instruments have a blocking
• mechanism which avoids accidental shots
• and thus eliminates unnecessary exposures
• to radiation and overheating.
• Seletronic Control
• The instrument enables the most adequate time for each specific situation with great precision.