BlueX IntraOs DG Digital X-ray - Now £1,850.00 Was £2,850.00 (Saving of 35%)

Description

IntraOs DG is an innovative dental X-ray equipment which meets the most stringent imaging requirements in the dental fi eld, both when using high resolution digital receptors or finest grain films.

The best results can be achieved when in combination with digital sensors, the full imaging potential of which, powered by image processing and manipulation, can be exploited without compromises.

The joint use of extra fi ne focus (XFF) generators and high resolution digital sensors is actually setting a new imaging standard with highly defi ned images and with great diagnostic power.

The very small focal spot of the X-ray insert, the beam limiting device with effective near focus collimation and the penetration power of the70 kV radiation beam constitute the best combination of elements to get sharp images with good radiographic contrast and optimum detail perception.

TECHNICAL DATA

  • Tube Head:
  • Focal Spot: 0.4 IEC 336/1993
  • Mains Voltage: 120/230 VAC, 50/60 Hz
  • High Voltage Potential: 70 kVp
  • Anodic Current: 3.5 mA
  • Inherent Filtration: 2.5 mm Al
  • Focus Skin Distance: 21 cm
  • Output Radiation Field: Round 6 cm, Rectangular 3.5x4.6 cm
  • Weight: 6.5 kg
  • Mechanical Support system
  • The wall mounted support system includes:
  • • Wall support (12 cm width, 24 cm height, 9 cm depth)
  • • 30, 60, and 80 cm extension arms
  • • Folding arm; useful reach of:
  • 138 cm with 30 cm extension arm
  • 168 cm with 60 cm extension arm
  • 188 cm with 80 cm extension arm
  • The mobile support is composed of:
  • • Mobile stand (74 cm width, 112 cm height, 62 cm depth)
  • • Folding Arm (73 cm height) Timer TipSet in mAs
  • Mains: 115/230 VAC, 50/60 Hz
  • Microprocessor controlled functionality
  • Sensitivity setting for digital receptor and fi lm
  • Automatic setting of technique factors by object selection or manual mode
  • Technique factors in mAs from 0.21 to 11.2 (18 steps R10 scale)
  • Zero-crossing power switching
  • Dose consistency (accuracy and reproducibility)
  • Inhibition of effects of mains fl uctuations selectable on request
  • Back-up timer
  • Hand-switch with 3 m coiled cord
  • Timer and/or hand-switch can be remotely mounted
  • Dimensions: 15 cm width, 24 cm height, 9 cm depth

Part of the METASYS Range

Related products

Ritter Portable X-RAY Vega DX-3000™ - Now £2,850.00 Was £4,250.00 (Saving of 32%)

Add to basket:

image 1

The Vega DX-3000™ is a Portable (Handheld) X-ray Unit

The DX-3000™ is certified as a portable X-ray generator suitable for in office, field service and emergency disaster relief use. The DX-3000 is carries FDA-510K, CE, and ISO 13485 certifications. The DX-3000's total weight is 1.8Kg.

The DX-3000 is a battery (rechargeable) powered X-ray generator working at fixed output of 60KV/1MA. The focal spot is set at 0.08mm with a target angle of 20 degrees, with variable exposure times ranging from 0.05 to 1.25secs, for a digital sensor, slightly higher for film at 0.20 to 1.35secs. The unit is powered by a rechargeable battery rated at; 14.2 to 16.8VDC. The unit also calculates the required X-ray dose (mGy) based on tooth number and patient type. Maximum number of exposures between charges are as high as 300. This may vary depending on dosage used for varying patient types.

It can be used as handheld device or can be used on a tripod or wall mounted. For added user protection the DX-3000 is also available with a X-ray scatter protection shield comprising of a circular lead/acrylic shield with the following dimensions of, 12mm thick and a diameter of 150mm.

Portable handheld X-ray generators usually expose the users and patients to least possible X-ray energy.

Safety and General Features

The digital and high voltage technology, used in the DX-3000, is both tried and proven for many years. Additional safety and user features are detailed below

Main features and benefits

Reduction to X-ray exposure:

Up to seven (7) fold reduction to normal x-ray units

Large Graphic Display:

Easy to see set parameters

High Frequency Electric Circuits:

Inverter type circuitry reduces exposure to over voltage conditions

Low X-ray output:

Switch from film media to electronic media with a simple output setting

Rechargeable Battery:

Portable, long time between charges (approximately, 300 exposures between charges)

Remote Control Switch:

Small cabled remote controller, enhance safety

Backscatter Shield:

Protects the operator from stray X-ray energy

Compact and Light weight:

Truly portable at 1.8kg

Carry Case:

Both portability and safety is enhanced with a robust dedicated carry case

Low Battery Warning:

Battery condition notice, improves work flow and safety

Specifications:

  • Model
  • DX-3000
  • X-ray generator
  • High Frequency
  • Tube voltage
  • 60kV(fixed)
  • Tube current
  • 1mA(fixed)
  • Tube type
  • Stationary
  • Tube focal spot
  • 0.8mm
  • Target angle
  • 20°
  • Total Filtration
  • 1.5mm Al (Inherent filtration: 0.8mm,
  • fixed, added filter: 0.7mm Aluminium)
  • Exposure time
  • 0.05~1.25sec - Digital Sensor
  • (increase 0.05sec)
  • 0.20~1.35sec - Film
  • Power requirement
  • DC 14.2~16.8V
  • Cooling System
  • Oil Cooling
  • Source to image receptor distance
  • >10cm (fixed cone)
  • X-ray field
  • 50mm
  • Battery Material
  • Lithium-Polymer
  • Weight
  • 1.8kg
  • Detector
  • Film / Digital Sensor
  • Power supply
  • Rechargeable battery
  • Display
  • Graphic LCD
  • Charger
  • Model: JBL910A-1600
  • Input Voltage: 100 - 250 VAC
  • Current: 1.0A

BlueX IntraOs 70 Analogue X-ray - Now £1,775.00 Was £2,750.00 (Saving of 35%)

Add to basket:

image 1

Description:

IntraOs 70 is a traditional dental X-ray equipment designed to face the most demanding needs of the dental profession both when using traditional films and digital imaging receptor.

Main feature of the system is the great energy offering obtained by combining the voltage potential of 70kVp and the anodic current of 7 mA with a wide range of exposure times, from 60 ms to 3.2 s. The penetration power of the radiation beam at 70 kVp grants sharp images with good radiographic contrast for optimal detail perception.

The microprocessor in the timer assures consistent film blackening in a wide range of operating conditions, day after day, years after years: high diagnostic quality.

TECHNICAL DATA:

Tube Head

• Type: Grid-Control Action

• Mains Voltage: 120/230 VAC, 50/60 Hz

• High Voltage Potential: 70kVp

• Anodic Current: 7 mA

• Focal Spot: 0.8 IEC 336/1982

• Duty Cycle: 1/60

• Inherent Filtration: ³ 2.1 mm AI

• Focus Skin Distance: 20 cm

• Output Radiation Field: Round Æ 6 com

• Coaxial connection, free rotation in horizontal plane

• Weight: 6.5 kg

Mechanical System

• Wall adaptor: width 12 cm (4.72"), height 9 cm (3.54")

• Support Arm: Short 30 cm (11.8"), Medium 60 cm (23.6"), Long 80 cm (31.5")

• Scissor arm; useful reach of 138 cm (54.3") with Short support arm, 168 cm (66.1") with Medium support arm, 188 cm (74") with Long support arm

Timer AutoSet:

  • Mains: 115/230 VAC, 50/60 Hz
  • Microprocessor controlled functionality
  • Zero-crossing power switching
  • Automatic setting of exposure time by object selection
  • Manual setting of exposure time from 60 ms to 3.2 s (plus or minus, 18 steps)
  • Child or adult patient selection
  • “Low dose” setting for digital receptors
  • Hand-switch provided with 3 m coiled cord
  • Automatic compensation of mains fluctuations selectable on request
  • Back-up Timer
  • Timer and hand-switch can be remotely mounted
  • Dimensions: 15 cm with, 24 cm height, 9 cm depth